Oki Pacemark PM4410 Safety & Warranty

Also see for Pacemark PM4410: User guide Installation and setup User guide User guide Information sheet

Contents

Oki Pacemark PM4410 Safety & Warranty Manual pdf 3 page image

3 - EnglishEnglishSafety Information, 120-Volt ModelsFor all countries / regionsYour OKI product has been carefully designed to give youyears of safe, reliable performance. As with all electricalequipment, there are a few basic precautions you should taketo avoid hurting yourself or damaging the product.• Carefully read the provided setup and operatinginstructions.• Save all provided documentation for future reference.• Read and follow all warning and instruction labels on theproduct itself.• The printhead can get quite hot when it has been printingfor a length of time. Do not touch the printhead until it hashad a chance to cool off.• Unplug the product before you clean it. Use only a dampcloth; do not use liquid or aerosol cleaners.• Place your product on a firm, solid surface. If you put it onsomething unsteady, it may fall and be damaged. If youplace it on a soft surface, such as a rug, sofa, or cushion,the vents may be blocked, causing the product to overheat.• Protect your product from overheating. Make sure noobstructions block the openings of the product. Do not putthe product on or near a heat source (such as a radiator orheat register). Keep the product out of direct sunlight.• Always use this product in a well ventilated area. Allowenough room around the product for adequate ventilationand easy access to the paper trays. If you put the productin any kind of enclosure, make sure the enclosure is wellventilated.• Do not use your product near water. Do not spill liquid ofany kind into it.• Be certain that your power source matches the rating listedon the back of the product. If you are not sure, check withyour dealer or with your local power company.• Do not connect this product to an uninterruptible powersupply (UPS). For further information please contact OkiData at 1-800-OKI-DATA.• Your product has a grounded, three-prong plug as a safetyfeature. This plug only fits into a grounded outlet. If theplug does not fit, the outlet may be an older, non-groundedtype. Contact an electrician to have the outlet replaced. Donot use an adapter to defeat the grounding.• Install the product near an easily accessed power outlet.• Avoid damaging the power cord. Do not put anything on itor place it where it will be walked on. If the cord becomesdamaged or frayed, replace it immediately.• If you are using an extension cord or power strip with theproduct, make sure that the total of the amperes requiredby all the equipment on the extension is less than theextension’s rating. The total ratings of all equipmentplugged into the outlet should not exceed 15 amperes.• Do not poke anything into the ventilation slots of theproduct. You could get an electrical shock or causehazardous electrical arcing, which could cause a fire.• Aside from the routine maintenance described in thedocumentation, do not try to service the product yourself.Removing the cover may expose you to shocks or otherhazards.• Do not make any adjustments other than those outlined inthe documentation. You may cause damage that will requireextensive repair work. The provided documentationexplains how to get your product serviced by qualified OkiData technicians.If anything happens that indicates that your product is notworking properly or has been damaged, unplug it immediatelyand follow the procedures in the provided documentation forhaving your product serviced.Here are some of the things to look for.• The power cord or plug is frayed or damaged.• Liquid has been spilled into the product, or the product hasbeen exposed to water.• The product has been dropped, or the cabinet is damaged.• The product does not function normally when you arefollowing the operating instructions.Additional Safety Informaton forTelecommunications EquipmentWhen using your telephone equipment, basic safetyprecautions should always be followed to reduce the risk offire, electric shock and injury to persons, including thefollowing:• Do not use this product near water—for example, near abathtub, washbowl, kitchen sink or laundry tub—in a wetbasement, or near a swimming pool.• Avoid using a telephone (other than a cordless type) duringan electrical storm. There may be a remote risk of electricshock from lightning.• Do not use the telephone to report a gas leak in the vicinityof the leak.• Use only the power cord and batteries indicated in thismanual. Do not dispose of batteries in a fire. They mayexplode. Check with local codes for possible special disposalinstructions.SAVE THESE INSTRUCTIONS.EnglishSafety Information, 220/240-Volt ModelsAll Countries / RegionsThis product has been carefully designed to give years of safe,reliable performance. As with all electrical equipment,however, there are a few basic precautions that should betaken to avoid injury or damage:Ensure this and all other documentation is both read carefully andretained for future reference.Ensure all warning and instruction labels on the product are read,understood and followed in order to prevent any risk of injury.This product may be heavy. Please check the weight of the productand take all necessary precautions to prevent the risk of personalinjury.The product must be placed on a flat solid surface strong enough tosupport its weight to prevent any risk of injury.Ensure that there is adequate ventilation all around the product toprevent overheating and any risk of fire.Keep the product away from direct heat sources such as radiatorsand out of direct sunlight to prevent any risk of overheating.The power supply required for this product is 220-240 VAC, 50/60Hz. (For any DC powered product, the figures are 9.6-31.2VDC, 4-1.8A.) Refer to your product's rating label on the machine for fullpower rating details. Ensure that you have a suitable power supplybefore connecting the product. If in doubt contact your dealer orcheck with your local power provider.Ensure both the product and mains power switches are in the OFFposition before connecting the AC power cable.