E-31Pacemark 4410 Setup GuideChanging Paper Paths ManuallyTo change paper paths manually:1. Press PARK.The current paper retracts from the paper path.2. Press PATH.The alternate paper automatically loads into the paper path.Run the Self TestsFont Sample TestTo print a sample of the available fonts:1. Make sure continuous form paper at least 8 inches wide is loadedand that the printer is turned off.2. Press and hold LF (1) while turning the printer on.To stop the test before it is complete, press ON-LINE/RESET.1Untitled-1 11/30/98, 1:36 PM31
