Advanced network settings > 97Using PEAP:a) Select Disable for IEEE802.1X.b) Select PEAP for the EAP Type.c) Enter a user name in EAP User.d) Enter the password in EAP Password.e) Select Authenticate Server and then click Import.f) Enter the file name of the CA certificate and then click OK.g) Specify the certificate issued by the certificate authority, which is the certificateauthority from which the RADIUS server obtained the certificate. A PEM, DER, andPKCS#7 file can be imported.h) Click Send.i) When the main unit comes online, proceed to "Wireless LAN settings".WIRELESS LAN SETTINGS1. Log in as the administrator.2. Click the Network Manager tab.3. Click the Wireless LAN Settings menu.4. In the Basic Settings field under Network Connection, select Wireless.5. Enter the SSID name of the wireless AP that you want to connect to in SSID.6. In the Security method, select the same security setting as the wireless AP thatyou want to connect to.Depending on the selected security method, configure one of the settings from (1)to (3) below.When Disable is selected, press the Send button at the bottom left of the Webscreen. (Not recommended for security reasons.)NOTEWhen WPA-EAP or WPA2-EAP is set for the security method and EAP-TLS isselected as the EAP Type, Not authenticate Server cannot be selected.MEMOThe default is "Disabled".MEMO"default" is set as the default.
