CLEARING PAPER JAMS > 765. Put the cartridge down gently onto a piece of paper to preventtoner from marking your furniture and to avoid damaging thegreen drum surface.6. Repeat this removal procedure for each of the remaining imagedrum units.7. Look into the printer to check whether any sheets of paper arevisible on any part of the belt unit.l To remove a sheet with its leading edge at the front ofthe belt (1), carefully lift the sheet from the belt and pullit forwards into the internal drum cavity and withdrawthe sheet.CAUTION!The green image drum surface at the base of the cartridge is verydelicate and light sensitive. Do not touch it and do not expose it tonormal room light for more than 5 minutes.CAUTION!Do not use any sharp or abrasive objects to separate sheets from thebelt. This may damage the belt surface.4231
