Oleo-Mac efco ARTIK 56 Manual
39IGBFDESKPGRTRCZRUSUKPL6. MAINTENANCE6.1 Safety RecommendationsWARNING- Before cleaning or doing maintenancework, take out the ignition key and readthe relevant instructions. Wear suitableclothing and work gloves whenever yourhands are at risk.- Never use the machine with worn ordamaged parts. Faulty or worn-out partsmust always be replaced and not repaired.Only use original spare parts: the use ofnon-original and/or incorrectly fitted partswill compromise the safety of the machine,may cause accidents or personal injuriesand will relieve the manufacturer of allobligations or liabilities.- A l l a d j u s t m e n t s o r m a i n t e n a n c eoperations not described in this manualmust be carried out by an AuthorisedService Centre, which has the necessaryexpertise and equipment to ensure thatthe work is done correc tly withoutaffecting the safety of the machine.Operations performed in unauthorisedcentres or by unqualified persons will voidall forms of warranty and all obligations orliabilities of the manufacturer.- The silencer and other parts of the engine(e.g. cylinder fins, spark plug) become hotduring operation and remain hot for awhile after the engine is stopped. Toreduce risk of burns do not touch thesilencer and other parts while they are hot.- Never modify the machine in any way.- Replace safety devices as soon as theybecome damaged or broken. Replace wornblades.- Keep all nuts, bolts and screws tightened toguarantee safe operating conditions.6.2 Routine MaintenanceThe following list is to help you maintain yourmachine’s safety and performance. It shows themain maintenance and lubrication operationsand their frequency.MAINTENANCE SCHEDULEService item FrequencyShear pins (cutter), check Before each useMotor oil (SAE 5W-30), check Before each useMotor oil (SAE 5W-30),changeAfter first 2 hours andthen every 20 hoursDrive belts, check After first 2 hours andthen every yearDrive belts, replace (1) In case of the needTyre pressure, check 50 hours or each 3monthsBattery charger (56 EL), check Each 3 monthsFlange snow dischargechute, lubricate (2) Each 3 monthsCutter, lubricate (2) Once per yearLinkages, lubricate (2) Once per yearSpark plug, check (0.7-0.8mm) 100 hoursSpark plug, replace(Champion N11YC, LDF7RTC)300 hours or once peryearValve clearance, check (1) 300 hoursGasoline strainer, clean (1) 300 hours1) This operation must be carried out byyour Dealer or an Authorised ServiceCentre.2) General lubrication should also becarried out whenever the machine is tobe left unused for a long period.Carburetor AdjustmentAllow the engine to warm up prior to carburetoradjustment.The carburetor is factory set and should notrequire adjusting. The carburetor will permitonly adjustment of the “T” screw (Fig. 48).WARNING: Don’t modify the carburetorin any way in such case the engine willnot run in compliance with emissionsregulations.Idle Speed AdjustmentIf the engine starts, runs, and accelerates butwill not idle; turn the idle speed screw “T”clockwise to increase idle speed (Fig. 48). |
Related manuals for Oleo-Mac efco ARTIK 56
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine