Clearing Paper JamsChapter 5: Clearing Jams and Jam Recovery v 5-13E N G L I S HOCT Jam Follow the procedure below to clear a paper jam from the OffsetCatch Tray (OCT) when the Control Panel displays the message:Duplex Module Jam Follow the procedure below to clear a paper jam from inside therear cover when a Duplex Module is installed and the Control Paneldisplays the message:Offset Jam-Open Rear Cover1 Open the printer’s rear cover (1).2 Open the OCT’s rear cover (2).3 Remove the jammed paper.4 Close the OCT’s rear cover.5 Close the printer’s rear cover.Paper Jam-Open Rear Cover1 Open the rear cover (1).2 Remove the Duplex Module.3 Remove the jammed paper.4 Replace the Duplex Module.5 Close the rear cover.On rare occasions, paper may jam in the fuser. To clear afuser jam, refer to the section “Fuser Jam” (page 5-16).
