Olivetti MB-502 Service Manual

Field Service Ver. 1.0 Jun. 2008 5. Machine AdjustmentMB-502Adjustment / Setting5.2 Manual Bypass Tray AdjustmentNOTEMake this adjustment after any of the following procedures has been performed.Upon setup of the Manual bypass tray unit.Use when the manual bypass paper size unit of the manual bypass guide has beenchanged.Use when a false paper size is displayed when the manual bypass is used.1. Call the Service Mode to the screen.See P.146 of the main body service manual.2. Touch [Machine Adjustment] o [Manual Bypass Tray Adjustment].3. Touch [Max. Width].4. Place the adjustment sheet (width:297 mm) [1] on the manual bypasstray as illustrated.5. Press the Start key.6. Check that “OK” appears beside[Max. Width].NOTE• Make the adjustment again if theresults are “NG”.A0EPF3C503DA[1]A0EPF3E515DAY109730-6 Service Manual 17