5-16 Service Manual XYAA6336SCREW ASCREW BFigure 5-17SCREW CBRACKETPLATEPLATEN5.8 REMOVING THE PLATEN• Remove the case (Section 5.2).• Remove the print assembly (Section 5.4).• Extract the plate by sliding it from the front (headside).PROCEED VERY CAREFULLY.• Remove the bracket and unscrew screws A, B, C.You can remove the platen in the direction of thearrow shown in the figure.• To reassemble the platen follow its disassemblyprocedure in reverse order and align as shown inthe figure.Note: After replacing the head readjust the parallelismand the distance between the print head andplaten (Section 6.2).
