Olivetti d-Copia 2001 Operator's Manual

Contents

Olivetti d-Copia 2001 Operator's Manual Manual pdf 19 page image

15BEFORE USING THE MACHINE1Loading the bypass tray1 Unfold the bypass tray.When feeding largepaper such as B4 and A3(8-1/2" x 14" and11" x 17"), pull out thebypass tray extension.2 Set the paper guides to the copypaper width.3 Insert the paper (print face down) allthe way into the bypass tray.To prevent a misfeed,verify once more that thepaper guides areadjusted to the width ofthe paper.Important points when inserting paper in the bypass tray• Up to 100 sheets of standard copy paper can be set in the bypass tray.• Be sure to place A6, A5 or 5-1/2" x 8-1/2" size paper or envelopes horizontally as shown in the following diagram( ).• When loading envelopes, make sure that they are straight and flat and do not have loosely glued construction flaps(not the closure flap).• Special papers except OLIVETTI recommended transparency film, labels, and envelopes must be fed one sheet ata time through the bypass tray.• When adding paper, first remove any paper remaining in the tray, combine it with the paper to be added and thenreload as a single stack. The paper to be added must be the same size and type as the paper already in the tray.• Do not use paper that is smaller than the original. This may cause smudges or unclean images.• Do not use paper that has already been printed on by a laser printer or plain paper fax machine. This may causesmudges or unclean images.If you loaded paper in the bypass tray, pressthe [TRAY SELECT] key ( ) to select thebypass tray. The bypass tray will not beselected automatically.NoteAvailable Not available