Olivetti d-Copia 200D Operation Manual

Also see for d-Copia 200D: Service manual Online manual

Contents

Olivetti d-Copia 200D Operation Manual Manual pdf 9 page image

72Follow the installation procedure below to use the unit properly.SETUP PROCEDUREWhen using the unit for the first time, setup the unit following the procedure shownbelow.* If you are only using the unit for copying, skip this step.If the unit does not function properly during setup or use, or if a functioncannot be used, see "TROUBLESHOOTING THE UNIT" (p.62).1 Open the package, and make sure that all the accessories aresupplied with the unit. (p.8)2 Remove the protective materials. (p.9)8 Now, you can copy (p.46), print (p.35) or scan (p.36) yourdocument.3 Install the toner/developer cartridger. (p.10)4 Load the paper in the paper tray (p.15) or the multi-bypasstray . (p.17)5 Plug the other end of the power cord into the nearest outlet. (p.12)6 Install the software.* (p.19)7 Connect the interface cable* (p.25) and turn on the unit. (p.12)2 SETTING UP THE UNIT