Olivetti d-Copia 300 Service Manual

Also see for d-Copia 300: Operation guide

Contents

Olivetti d-Copia 300 Service Manual Manual pdf 47 page image

2FD/2FF/2FG1-3-221-3-7 Installing the booklet stitcher/switchback unit (option)Preparation1. Open the conveying cover of the copier.2. Remove the two screws securing thefeedshift guide assembly and then theassembly.3. Fit the curl eliminator to the conveying coversuch that the projections on the cover fit intothe two ends of the curl eliminator.4. Secure the curl eliminator using the twoscrews removed in step 2.5. Close the conveying cover.6. Fit the latch catch to the conveying coverusing two M4 × 10 binding screws.ConveyingcoverFeedshift guideassemblyScrewsProjectionProjectionCurl eliminatorScrewScrewLatch catchM4 × 10 binding screwsConveying coverFigure 1-3-42Figure 1-3-43Figure 1-3-44