UBS Interface Connector3.8 Connection ProceduresPrepare a USB Cable.Note! • The cable of the MFP is not attached. Users should buy seperately.• Obtain the cable of USB specification by yourself.• Use the USB cable of Hi-Speed specification in case the connection is to be madeusing “HI-Speed” mode of USB2.0.Switch off the power of the MFP and computer.Memo Although the USB cable can be connected or removed with the switch of thecomputer and printer on, switch off the power of the MFP at this step in order toensure installation of the MFP driver and USB driver later.Connect the MFP with the computer.(1) Plug the USB cable into the USB interface connector of the MFP.(2) Plug the USB cable into the USB interface connector of the computer.Note! Be careful not to insert the USB cable into the network interface connector.Or else it may cause troubles.Preparing coresMemo Use the longer one of two kinds cores packed with MFP.How to attach a coreMemo Attach a core to the USB cable at the point about 30~40mm away from theconnector part of the printer side, and then close the core to fix it.Y108500-4 Service Manual 53
