14En1 Press 2Y.2 Press 12 to select [Y ON], and press e.3 Press the shutter button fully to take the picture.The self-timer lamp lights for approximately 10 seconds afterthe shutter button is pressed, then starts blinking. Afterblinking for approximately 2 seconds, the picture is taken.1 Press 3#.2 Press 12 to select the flash mode, and press e.3 Press the shutter button halfway.When the flash is set to fire, the # mark lights.4 Press the shutter button completely to take the picture.To save battery power, the camera automatically enters sleep mode and stopsoperating if not used for 3 minutes in shooting mode. Press the shutter buttonor zoom button to reactivate the camera.If the camera is not operated for 12 minutes after the camera enters sleepmode, it automatically retracts the lens and turns off. To resume operation, turnon the power again.Icon Flash Mode DescriptionNoindicationAuto flash The flash fires automatically in low light or backlightconditions.!Red-eyereduction flashThe red-eye reduction flash mode significantly reducesthis phenomenon by emitting pre-flashes before firingthe regular flash.# Fill-in flash The flash fires regardless of the available light.$ Flash off The flash does not fire.Self-TimerSelf-Timer LampFlash ModesPower Save Feature