20NOTESLCD Display and Backlight● Do not point the viewfinder towards strong light like the sun, as this maydamage interior of the viewfinder.● The backlight built into the monitor and control panel has a limited servicelife. When the monitor gets dark and jittery, consult your nearest Olympusdealer.● In places subject to low temperatures, the backlight may take a long time toturn on or its color may change temporarily. When using the camera inextremely cold places, it is a good idea to occasionally place it in warmplace. A backlight exhibiting poor performance due to low temperatures willrecover in normal temperatures.● Do not push the monitor forcibly; otherwise the image may become vague,resulting in a Display mode failure or damage to the monitor.● When a subject is viewed diagonally in the camera, the edges may appearzigzagged on the monitor. This is not a malfunction; It will be lessnoticeable in Display mode.● A strip of light may appear on the top/bottom of the monitor, but this is not amalfunction.● The LCD display is made with high-precision technology. However,black spots or bright spots of light may appear constantly on the LCDdisplay. Due to its characteristics or the angle at which you areviewing the monitor, the spot may not be uniform in color andbrightness. This is not a malfunction.Important safety instructions (cont.)
