33ENMake the settings for the functions while referring to “Using the Menu” (p. 3).Selecting a video signal system to match your TV [VIDEO OUT]x SETUP X VIDEO OUTThe TV video signal system varies depending on the countries and regions. Before viewing cameraimages on your TV, select the video output according to your TV’s video signal type.Submenu 2 ApplicationNTSC Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on.PAL Connecting the camera to a TV in European countries, China, and so on.The factory default settings differ according to the region where the camera is sold.To play back camera images on a TV1 Connect the TV and camera.Connect to the TV videoinput jack (yellow) andaudio input jack (white).Multi-connectorAV cable (supplied)2 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/[PAL]).3 Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the camera).”For details on changing the input source of the TV, refer to the TV’s instruction manual.4 Press the q button, and use klmn to select the image for playback.Depending on the TV’s settings, the displayed images and information may become cropped.Saving battery power between shots[ POWER SAVE]x SETUP X POWER SAVESubmenu 2 ApplicationOFF Cancels [POWER SAVE].ONWhen the camera is not beingused for approx. 10 seconds, themonitor automatically turns off tosave battery power.To resume standby modePress any button.Turning off the camera sounds[j SILENT MODE]j SILENT MODESubmenu 1 ApplicationOFFButton operation sound/shuttersound/warning sound/sound ofimage playback of pictures arenot muted.ONThe electronic sounds (operationsound, shutter sound, warningsound) and playback sounds aremuted.[BEEP] (p. 32)