En 37EnDOWNLOADING PICTURES TO A COMPUTERBy connecting the camera to a computer with the provided USB cable,images on a card can be transferred to the computer. Some OS’s (operatingsystems) may need a special setup before connecting to the camera for thefirst time. Follow the chart below. For details of the procedures in the chart,refer to the “Reference Manual” on the software CD. Also refer to the“Software Installation Guide” included in the CD-ROM package.* Even if your computer has a USB connector, data transfer may not functioncorrectly if you are using one of the operating systems listed below or if you havean add-on USB connector (extension card, etc.).• Windows 95/NT 4.0• Windows 98/98 SE upgrade from Windows 95• Mac OS 8.6 or lower (except Mac OS 8.6 equipped with USB MASS StorageSupport 1.3.5 installed at the factory)• Data transfer is not guaranteed on a home-built PC system or PCs with no factoryinstalled OS.Identifying the OSWindows 98/98 SE (Second Edition) Windows Me/2000/XPMac OS 9.0 - 9.1/OSX (10.0)* For OS 8.6, see below.Installing the USBdriver for Windows 98Connecting the camera to the computer using the provided USB cableConfirming the computer recognizes the cameraDownloading image filesDisconnecting the USB cable• You can view images using: graphics applications that support the JPEG fileformat (Paint Shop Pro, Photoshop, etc.); Internet browsers (NetscapeCommunicator, Microsoft Internet Explorer, etc.); CAMEDIA Mastersoftware; or other software. For details on using commercial graphicsapplications, refer to their instruction manuals.