Safety precautions8EnGrounding, Polarization — If this product can be used with a specified AC adapter, theadapter may be equipped with a polarized alternating current line plug (a plug with oneblade wider than the other). This safety feature allows the plug to fit into the power outletonly one way. If you cannot insert the plug into the wall outlet, pull it out, reverse it, andthen reinsert it. If the plug still fails to fit, contact an electrician and have the receptaclereplaced.Protecting the Power Cord — The power supply cord should be placed so it will not bewalked on. Never put a heavy object on the power cord or wrap it around the leg of atable or chair. Keep the area around the power cord connection points, at the poweroutlet, and at the product connection, free of all AC adapter or accessory power cords.Lightning — If a lightning storm occurs while using a specified AC adapter, remove itfrom the wall outlet immediately. To avoid damage from unexpected power surges,always unplug the AC adapter from the power outlet and disconnect it from the camerawhen the camera is not in use.Overloading — Never overload wall outlets, extension cords, power strips, or otherpower connection points with too many plugs.Foreign Objects, Liquid Spillage — To avoid personal injury caused by fire or electricalshock from contact with internal high voltage points, never insert a metal object into theproduct.Avoid using the product where there is a danger of spillage.Heat — Never use or store this product near any heat source such as a radiator, heatregister, stove, or any type of equipment or appliance that generates heat, includingstereo amplifiers.Servicing — Refer all servicing to qualified personnel. Attempting to remove the coversor disassemble the product, could expose you to dangerous high voltage points.Damage Requiring Service — If you notice any of the conditions described below whileusing a specified AC adapter, unplug it from the wall outlet and refer servicing to qualifiedservice personnel:a) Liquid has been spilled onto the product or some other object has fallen into theproduct.b) The product has been exposed to water.c) The product does not operate normally despite following operating instructions.Adjust only the controls described in the operating instructions as improperadjustment of other controls could damage the product and require extensive repairwork by a qualified technician.d) The product has been dropped or damaged in any way.e) The product exhibits a distinct change in performance.Replacement Parts — When replacement parts are required, make sure that the servicecenter uses only parts with the same characteristics as the originals, as recommended bythe manufacturer. Unauthorized substitution of parts could result in fire, electrical shock,or create other hazards.Safety Check — Upon completion of servicing or repairs, ask the service technician toperform safety checks to determine that the product is in good working order.FCC NoticeRadio and Television InterferenceChange or modifications not expressly approved by the manufacturer may void the user’sauthority to operate this equipment. This equipment has been tested and found to complywith the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limitsare designed to provide reasonable protection against harmful interference in a residentialinstallation.This equipment generates, uses, and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications.However, there is no guarantee that interference will not occur in a particular installation. Ifthis equipment does cause harmful interference to radio or television reception, which canbe determined by turning the equipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures: