9SET OKSELECTDate/time setup screenSET OKSELECT END OKSELECTY M DDate/time setup screen Setting the Date andTimeOperating Procedure1. Check that the camera is set to thePlayback mode by holding down themonitor button for a moment.2. Press the OK/menu button. The playback mode menu 1/3 is displayed onthe monitor.3. Press the or arrow pad key todisplay the menu 3/3 and select .4. Display the “Y—M—D” menu by pressingthe or arrow pad key.5. Select one of the following date/time displayformats by pressing the or arrow padkey.Y—M—D (Year·Month·Day)M—D—Y (Month·Day·Year)D—M—Y (Day·Month·Year)Then press the arrow pad key. The cursor moves to the figure setting field.6. Set the first figure by pressing the orarrow pad key, and then press the arrowpad key. The cursor moves to the next figure.7. Repeat the above steps to set the hour andminutes.8. When the actual time reaches zero seconds,press the OK/menu button. The date and time are set and the screenreturns to the playback mode menu 3/3.Arrow padOK/menu buttonPlayback mode menu 1/3 screen1 /3SET OKSELECTNOOFFNONOMonitor button3/3END OKSELECTPlayback mode menu 3/3 screen
