Olympus DP-201 Instructions Manual

Also see for DP-201: Instrucciones Mode d'emploi Manual

``` ``` ``````abcd```a Current dateb Recording mode indicatorc Microphone sensitivity indicatord Total number of recorded filesfor the datee Current file numberf Elapsed recording timeg Remaining recording timeabcdefg```VOICE RECORDERNOTE CORDER DP-201EN INSTRUCTIONSThank you for purchasing an Olympus Digital Voice Recorder.Please read these instructions for informationabout using the product correctly and safely.Keep the instructions handy for future reference.To ensure successful recordings, we recommend thatyou test the record function and volume before use.Shinjuku Monolith, 3-1 Nishi-Shinjuku 2-chome, Shinjuku-ku, Tokyo 163-0914, Japan.Tel. +81 (0)3-3340-2111http://www.olympus.com3500 Corporate Parkway, P.O. Box 610, Center Valley, PA 18034-0610, U.S.A.Tel. 1-888-553-4448http://www.olympusamerica.comGetting started1 Insert batteries. 2 Turn on the power.Slide the POWER switch to ON.• Be sure to remove the protective film on the display before using this product.To turn off the power:While the recorder is in the stop mode, slide the POWER switch toOFF/HOLD.Power save mode:If no operations are performed for more than 10 minutes when thepower is on, the display automatically turns off and the recorder entersthe power save mode. To exit the power save mode, press any button.HOLD:If sliding the POWER swich to OFF/HOLD while the recorder is inoperation, all buttons and switches are disabled without interrupt-ing the current operations.Strap eyelet• A strap is not supplied with this product.Battery indicator:If [ ] is displayed on the screen, replace batteries as soon as possible. If thebattery level becomes too low, [ ] and [Battery Low] are displayed and thenthe recorder automatically turns off.Set the time and date. “Setting time and date” (Verso)“Changing the recording mode” (Verso)Recording indicator lights while recording.PauseMicrophone sensitivityTurn the microphonetoward a sound source tobe recorded.HighLowHighly sensitive mode which can record surround-ing noises (H)Standard sensitivity(L)• To ensure successful recordings, we recommend you to test recording with the selectedfunctions and volume beforehand.• To ensure recording from the beginning, start recording a sound source after therecording indicator lights.• The recorder cannot record if [Memory Full] or [Maximum File Size is reached] isdisplayed. Delete unnecessary files to free up some space in memory.• If the recorder is placed directly on a table, the vibrations of the table are likely to berecorded. To record sound clearly, place a notebook or handkerchief between therecorder and the table to prevent the vibrations from being recorded.• When the available recording time becomes less than 60 seconds, the recordingindicator starts flashing. The indicator flashes faster if the available time decreases to 30seconds and to 10 seconds.RecordingRecording• The [Set Time & Date] screen appears when you use the recorder for the first time or when the recorder is turned on after morethan 30 minutes without power supply.• If the time and date are not set, the time and date of the default settings are recorded to files .a Recording dateb Current file numberc Elapsed playback timed Playback position bar indicatorForwarding and RewindingChanging the playback speedNoise cancelFastSlowNoise Cancel indicatorOnOffNoise is reduced whenplayed back to achievebetter sound quality.When an earphone is connected, the speaker is turnedoff. Playback sound for an earphone is monaural.To avoid irritation to the ear, turn downthe volume before inserting an earphone.Do not raise the volume too high whenusing an earphone. It may cause hearingimpairment and a decrease in hearingability.• An earphone is not supplied withthis product.VolumeHighLowFile searchRecorder statusindicator: During playbackF : During fast playbackS : During slow playback When the recorder is instop mode, press andhold the STOP (/) but-ton to display the [Time &Date] and [Remain].e Approximate file lengthPlaybackPlaybackPress and holdeYou canchange therecordingmode!To pause recording, press the REC (-) button whilerecording. To resume the recording, press the REC (-)button again.• Recording is automatically stopped if 60minutes elapsed after recording is paused.Select the sensitivity according to the surrounding conditions.Recorded files aregrouped by date.s To fast-forward or rewind a file, press and hold 0 or 9 button while playingback a file.s To skip to the next file or previous file, press 0 or 9 button.s Fast-forwarding or rewinding continues to the next file.Playback speed is changedbetween 0.5x, 0.75x, normal,1.2x, 1.5x, and 2.0x by eachpress of the buttons.The file is played back as itwas recorded.• When the NOISE CANCEL switch is set to ON, playbackspeed returns to normal.Search for filesby the date theywere recorded.sWhen searching for a file recorded on October 15.The date displayappears.Select October 15. The first file isplayed back.If the file is skipped,the recorder playsback the next file.U1-BS0952-01TR1111Introduction• The contents of this document may be changed in the future without advancednotice. Contact our Customer Support Center for the latest information relatingto product names and model numbers.• The screen and recorder illustrations shown in this manual were produced duringthe development stages and may differ from the actual product. The utmost carehas been taken to ensure the integrity of the contents of this document. In theunlikely event that a questionable item, error, or omission is found, please contactour Customer Support Center.• Any liability for passive damages or damage of any kind occurred due to data lossincurred by a defect of the product, repair performed by the third party otherthan Olympus or an Olympus authorized service station, or any other reason isexcluded.For customers in North and South AmericaUSA RFI:This equipment has been tested and found to comply with the limitsfor a Class B digital device, pursuant to part 15 of the FCC Rules. Theselimits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, usesand can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference willnot occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Canadian RFI:This digital apparatus does not exceed the Class B limits for radio noiseemissions from digital apparatus as set out in the Radio InterferenceRegulations of the Canadian Department of Communications.Cet appareil numérique ne dépasse pas les limites de Catégorie B pour lesémissions de bruit radio émanant d’appareils numériques, tel que prévudans les Règlements sur l’Interférence Radio du Département Canadiendes Communications.Protective film

/ 2

Related manuals for Olympus DP-201