Olympus E-P1 Instruction Manual

Also see for 262811: Brochure & specs

Contents

Olympus E-P1 Instruction Manual Manual pdf 100 page image

100ENCustomizing your camera9AEL/AFL MEMOYou can lock and maintain the exposure by pressing the AEL/AFL button.[ON] Press the AEL/AFL button to lock and maintain the exposure. Press again tocancel the maintaining of the exposure.[OFF] The exposure will be locked only while the AEL/AFL button is pressed.; FUNCTIONYou can assign a function to the < button.[Fn FACE DETECT]Press the < button to set [g FACE DETECT] to [ON] and activate the optimalsettings. Press again to set it to [OFF].g“Using the face detection function” (P. 39), “g FACE DETECT” (P. 104)[PREVIEW] (electronic)While holding down the < button, you can use the preview function.g“Preview function” (P. 48)[V]Press the < button to acquire the WB value.g“Setting the one-touch white balance” (P. 69)[P HOME]Press the < button to switch to the registered AF home position. Press the buttonagain to switch to the original AF target mode. If you turn off the camera while it is setto the AF home position, the original position will not be stored.g“Registering an AF target mode” (P. 59)[MF]Press the < button to switch AF mode to [MF]. Press the button again to switch tothe original AF mode.[RAW K]Press the < button to switch from JPEG to JPEG+RAW or from JPEG+RAW to JPEG forthe record mode.You can change the record mode by turning the sub dial while holding down the <button.[TEST PICTURE]Pressing the shutter button while pressing the < button enables you to check thepicture you have just taken on the monitor without having to record the picture to thecard. This is useful when you want to see how a picture turned out without saving it.[MY MODE]While holding down the < button, you can take pictures using the camera settingsregistered in the [MY MODE SETUP].g“MY MODE SETUP” (P. 101)[BACKLIT LCD]Press the < button to turn the LCD monitor off. This function is useful when you areusing the optional optical viewfinder. Press the < button again to turn the LCDmonitor on.[OFF]Does not allow function allocation.