14En1 Press flash mode button ( ).Flash setting screen is displayed.2 Press [\ to select the flash mode, and press i.You can also set by pressing repeatedly.3 Press the shutter button halfway.In conditions where the flash will fire, # lights (flash stand-by).4 Press the shutter button completely to take the picture.Flash working range:W (max.): Approx. 0.2 m to 3.8 m (0.7 ft. to 12.5 ft.)T (max.) : Approx. 0.5 m to 2.2 m (1.6 ft. to 7.2 ft.)To save battery power, the camera automatically enters to the sleep mode andstops operating if not used for 30 seconds. The monitor switches off automatically.Press the shutter button, l or k to turn the monitor on. You can select thelength of time after which the camera automatically enters to the sleep mode.If the camera is not operated for 30 minutes after the camera enters sleep mode,it automatically retracts the lens and turns off. To resume operation, turn on thepower again.Icon Flash Mode DescriptionNoindicationAuto flash The flash fires automatically in low light or backlightconditions.!Red-eyereduction flashThe red-eye reduction flash mode significantly reduces thisphenomenon by emitting pre-flashes before firing theregular flash.# Fill-in flash The flash fires regardless of the available light.$ Flash off The flash does not fire even in low light conditions.Flash ModesPower Save Feature
