13En1 Press Y# repeatedly to select the flash mode and press i.2 Press the shutter button halfway.When the flash is set to fire, the # mark lights.3 Press the shutter button completely to take the picture.Flash working range:W (max.):Approx. 4.0 m (13.1 ft.)T (max.): Approx. 2.5 m (8.2 ft.)1 Press NY to select [Y ON] and press i.2 Press the shutter button fully to take the picture.The self-timer lamp lights for approximately 10seconds after the shutter button is pressed, then startsblinking. After blinking for approximately 2 seconds,the picture is taken.To save battery power, the camera automatically enters sleep mode and stopsoperating if not used for approximately 3 minutes. Operate the shutter button orzoom button to reactivate the camera.If the camera is not operated for approximately 15 minutes after the camera enterssleep mode, it automatically retracts the lens and turns off. To resume operation,turn on the power again.Icon Flash Mode DescriptionNoindicationAuto flash The flash fires automatically in low light or backlightconditions.!Red-eyereduction flashThe red-eye reduction flash mode significantly reduces thisphenomenon by emitting pre-flashes before firing theregular flash.# Fill-in flash The flash fires regardless of the available light.$ Flash off The flash does not fire even in low light conditions.Flash ModesSelf-TimerSelf-Timer LampPower Save Feature