Getting to know your camera better50 EN• If you use a non-Olympus card or a card used for another application, suchas a computer, the message [CARD ERROR] is displayed. To use this cardwith this camera, use the [FORMAT] function to format the card.g “MEMORY FORMAT (FORMAT) Formatting the internal memory or card”(P. 26)This camera uses several lamps to indicate the camera status.• Performing any of the following operations when not actually taking picturescan deplete the battery power.• Repeatedly pressing the shutter button halfway• Repeatedly using the zoom• To save battery power, turn off the camera whenever it is not in use.• Some items may not be selectable from the menus when using the arrow pad.• Items that cannot be set with the current shooting mode• Items that cannot be set because of an item that has already been set:[%] and [#], etc.• Items that cannot be set because you are attempting to edit picturestaken with another camera.• Some functions cannot be used when there is no card in the camera.[PANORAMA]/[PRINT ORDER]/[FORMAT]/[BACKUP]Using a new cardLamp indicatorsLamp StatusSelf-timer lamp The lamp lights for approximately 10 seconds, blinks forapproximately 2 seconds, and then the picture is taken.Card access lamp Lit (red): Shooting modeLit (green): Playback modeUnlit: Power is off.Blinking (red): A picture is being recorded, the camera isreading a movie, or images are being downloaded (whenconnected to a computer).• Do not do any of the following while the card access lampis blinking. Doing so may prevent the image data frombeing saved and render the internal memory or cardunusable.• Open the battery/card compartment cover• Remove the batteryGreen lamp of themonitorLit: The focus and exposure are locked.Blinking: The focus and exposure are not locked.• Release your finger from the shutter button, re-positionthe AF target mark on the subject and press the shutterbutton halfway again.Extending the useful life of the batteryFunctions that cannot be selected from menus