40 ENError messageWhen one of the messages below isdisplayed on the monitor, check thecorrective action.Error message Corrective actionqCARD ERRORCard problemInsert a new card.qWRITEPROTECTCard problemUse a computer to cancel theread-only setting.>MEMORY FULLInternal memory problemInsert a card.Erase unwanted images. *1••qCARD FULLCard problemReplace the card.Erase unwanted images. *1••OKSETCARD SETUPCLEAN CARDFORMATCard problemUse kl to select[CLEAN CARD], and press theB button. Take out the card,wipe the contact area (p. 44)with a soft, dry cloth, and thenload the card again.Use kl to select[FORMAT], and press theB button. Next, use klto select [YES], and press theB button. *2••INOKSETMEMORY SETUPPOWER OFFMEMORY FORMATInternal memory problemUse kl to select[MEMORY FORMAT], and pressthe B button. Next, use klto select [YES], and press theB button. *2LNO PICTUREInternal memory/Card problemTake pictures before viewingthem.rPICTUREERRORProblem with selected imageUse photo retouch software,etc. to view the image on acomputer. If the image stillcannot be viewed, the image fileis corrupted.rTHE IMAGECANNOTBE EDITEDProblem with selected imageUse photo retouch software, etc.to edit the image on a computer.CARD-COVEROPENOperation problemClose the battery/cardcompartment cover.gBATTERYEMPTYBattery problemInsert new batteries.If using rechargeable batteries,charge the batteries.••NOCONNECTIONConnection problemConnect the camera andcomputer or printer correctly.NO PAPERPrinter problemLoad paper into the printer.NO INKPrinter problemRefill the ink in the printer.JAMMEDPrinter problemRemove the jammed paper.SETTINGSCHANGED *3Printer problemReturn to the status where theprinter can be used.PRINT ERRORPrinter problemTurn off the camera and printer,check the printer for anyproblems, and then turn thepower on again.rCANNOT PRINT *4Problem with selected imageUse a computer to print.*1 Before erasing important images, download them toa computer.*2 All data will be erased.*3 This is displayed, for instance, when the printer’spaper tray has been removed. Do not operatethe printer while making the print settings on thecamera.*4 This camera may be unable to print images taken byother cameras.