Getting to know your camera betterEN 45• To return the changed shooting settings to default settings while shooting, set [RESET] to[YES].g “RESET Changing the shooting functions back to default settings” (P. 19)• All shooting settings except for P mode, [IMAGE QUALITY] and the selected scene modereturn to default settings when the camera is turned off.• When a card has been inserted in the camera, the pictures in the internal memory cannotbe played back. Pull out the card before operating the camera.• Press the zoom lever to the W-side to display the pictures as thumbnails (index display).g “Zoom lever Zooming while shooting/Close-up playback” (P. 15)• Once sound is added to a picture, it is not possible to erase the sound. In this case, makea re-recording with silence.g “R Adding sound to still pictures” (P. 22)The size of the picture displayed on a computer screen changes depending on the computersettings. When the monitor setting is 1,024 × 768 and you are using Internet Explorer to viewa picture with an image size of 2,048 × 1,536 at 100%; the entire picture cannot be viewedwithout scrolling. There are several ways you can view the entire picture on the computerscreen.View the picture using image browsing software• Install the OLYMPUS Master 2 software from the provided CD-ROM.Change the monitor setting• The icons on the computer desktop may be rearranged. For details of changing thesettings on your computer, refer to the computer’s instruction manual.To return the settings of functions to default settingsPlayback tipsPlaying back pictures in the internal memoryQuickly displaying a desired pictureErasing sound recorded to still picturesViewing pictures on a computerViewing the entire picture on a computer screenWhen you get an error message on the camera...Monitor indication Possible cause Corrective actionqCARD ERRORThere is a problem with thecard.This card cannot be used. Insert a newcard.qWRITE PROTECTWriting to the card isprohibited.The recorded image has been protected(read-only) on a computer. Download theimage to a computer and cancel the read-only setting.>MEMORY FULLThe internal memory has noavailable memory andcannot store any new data.Insert a card or erase unwanted data.Before erasing, backup the data ofimportant pictures using the card ordownload such pictures to a computer.