Olympus FE-300 Instruction Manual

Also see for FE 300 - Digital Camera - Compact: Manuel d'instructions Instruction manual Basic Manual

Olympus FE-300 Instruction Manual Manual pdf 20 page image

Menu operations20 ENThe scene selection screen displays sample images and the shooting mode to best suit the situation. This canbe set only when the mode dial is set to f.• By switching to another scene, most settings will be changed to the default settings of each scene.g “f Shooting pictures by selecting a scene mode according to the situation” (P. 12)• When [ISO] is set to [3200] or higher, the following restriction applies.• [IMAGE QUALITY] is limited to [2048 × 1536] or lower.• [FINE ZOOM] is not available.This function allows you to zoom up to approximately 19x by combiningthe optical zoom and image cropping. There is no deterioration in theimage quality since data conversion (by increasing pixel resolution) is notperformed.• The available magnification varies depending on the [IMAGE QUALITY]setting.• The available [IMAGE QUALITY] setting is [SQ1] or lower.R (still pictures) OFF P. 21R (movies) ON P. 21AF MODE iESP P. 21f (Scene) Shooting pictures by selecting a scene according to the situationCAMERA MENUWB ................................................................................................. Adjusting the color of a pictureAUTO The white balance is adjusted automatically for natural color,regardless of the light source.5 Sunny day For shooting under a clear sky.3 Cloudy day For shooting under a cloudy sky.1 Tungsten light For shooting under tungsten lighting.w Fluorescentlamp 1For shooting under daylight fluorescent lighting. (This type of lamp ismainly used in homes.)x Fluorescentlamp 2For shooting under a neutral white fluorescent lamp. (This type oflamp is mainly used in desk lamps.)y Fluorescentlamp 3For shooting under a white fluorescent lamp. (This type of lamp ismainly used in offices.)ISO ......................................................................................................Changing the ISO sensitivityAUTO Sensitivity is automatically adjusted according to the conditions of thesubject.50/100/200/400/800/1600/3200/6400A low value lowers the sensitivity for daylight shooting of clear, sharppictures. The higher the value, the better the camera’s light sensitivity andability to shoot with a fast shutter speed and in low light conditions.However, high sensitivity introduces noise into the resulting picture, whichmay give it a grainy appearance.FINE ZOOM .............................. Zooming in on your subject without reducing image qualityFunction Factory default setting Ref. Page34OFF /ON