Olympus FE-3000/X-890 Instruction Manual

Olympus FE-3000/X-890 Instruction Manual Manual pdf 30 page image

30 ENErasing data completely[ MEMORY FORMAT]/[FORMAT]E SETUP X MEMORY FORMAT/FORMATBefore formatting, check that no importantdata is left in the internal memory or card.Non-Olympus cards and cards that havebeen formatted by a computer must beformatted with this camera before use.Submenu 2 ApplicationYESCompletely erases the image datain the internal memory *1 or card(including protected images).NO Cancels formatting.*1 Be sure to remove the card before formatting theinternal memory.Copying images in the internal memoryto the card [BACKUP]E SETUP X BACKUPSubmenu 2 ApplicationYES Backs up image data in theinternal memory to the card.NO Cancels the backup.It takes some time to back up data. Checkthat the battery has sufficient power beforestarting the backup.Changing the display language [W]E SETUP X W“Changing the display language” (p. 13)Submenu 2 ApplicationLanguages *1The language for the menus anderror messages displayed on themonitor is selected.*1 The available languages vary depending on thecountry and/or region where the camera waspurchased.Adjusting the CCD and the imageprocessing function [PIXEL MAPPING]E SETUP X PIXEL MAPPINGThis function has already been adjustedat factory shipping, and no adjustment isneeded right after purchase. Approximatelyonce a year is recommended.For best results, wait at least one minuteafter taking or viewing pictures beforeperforming pixel mapping. If the camera isturned off during pixel mapping, be sure toperform it again.To adjust the CCD and the imageprocessing functionPress the B button when [START](Submenu 2) is displayed.The camera checks and adjusts the CCD and theimage processing function at the same time.●Menus for Other Camera Settings