Olympus M-5000 Instruction Manual

Also see for M-5000: Basic Manual

30 ENTaking pictures with[COMBINE IN CAMERA 1]1 Press the shutter button to take the firstframe.2 Move the camera slightly in the direction ofthe second frame.SAVE OKMENUCANCELTarget markPointerScreen when combiningimages from left to right3 Move the camera slowly while keeping itstraight, and stop the camera where thepointer and target mark overlap.The camera releases the shutter automatically.SAVE OKMENUCANCELTo combine only two pictures, press theE button before taking a third frame.4 Repeat Step 3 to take a third frame.After the third frame is taken, the cameraautomatically processes the frames and thecombined panorama image is displayed.To exit the panorama function without savingan image, press the  button.If the shutter does not automatically release,try [COMBINE IN CAMERA 2] or [COMBINE INPC].●●Taking pictures with[COMBINE IN CAMERA 2]1 Use CD to specify at which edge the nextpicture is to be connected.MENUCANCELDirection forcombining thenext frame2 Press the shutter button to take the firstframe.A guide frame appears as a reference.1st frameMENUCANCEL MENUCANCELGuide frameJoint area3 Compose the next shot so that thejoint area overlaps the guide frame.Composition of the 2nd frameOKSAVEMENUCANCEL4 Press the shutter button to take the nextshot.To combine only two pictures, press theE button before taking the third frame.5 Repeat steps 3 and 4 to take a thirdframe.After the third frame is taken, the cameraautomatically processes the frames and thecombined panorama image is displayed.To exit the panorama function without savingan image, press the  button.●●