– 1 –This guide is for quick reference only, especially for inspection and troubleshooting. Please refer to the instructionsprovided with the device for detailed instructions.1.1 Movement and lock of the equipment1.3 Connection of the monitorHolding the movement handles of this instrumentfirmly. Check the position of the brake pedal, push upit with a foot to unlock the casters.After stopping this instrument, check the position ofthe brake pedal, push it until it hits the back, applythe brake, and confirm that this instrument is lockedto the floor.1.2 Connection of the power cordConnect the power plug of the power cord directly into the hospital grade wall mains outlet. Connection of LMD-X550ST, LMD-X310ST, LMD-X550S, or LMD-X310SThe methods of connection of this instrument to the LMD-X550ST, LMD-X310ST, LMD-X550S, andLMD-X310S are completely identical. The following instructions take the connection of the LMD-X550ST asan example.OME-V200 Quick Reference Guide1 Installation and ConnectionBrake pedalUnlock LockBrake pedalLMD-X550STMAJ-2309SDI1 input terminals A – DA(Red)3G-SDI quad-linkcombined output 1 or 2terminalOME-V200B(Green)C(Blue)D(White)