Recording sound with still pictures745Additional shooting functions1 Use the arrow pad to choose atwhich edge you want toconnect the pictures.q : The next picture is connected atthe right edge.p : The next picture is connected atthe left edge.s : The next picture is connected atthe top.r : The next picture is connected at the bottom.2 Make sure that the edges of the pictures overlap, then takethe pictures.• The focus, exposure and white balance are set by the first picture. Do notselect an extremely bright subject (such as the sun) for the first picture.• You cannot adjust the zoom after the first picture.• Panorama shooting is possible for up to 10 pictures. When you have taken10 pictures, a warning mark g is displayed.3 Press Z to exit panorama shooting.Sound can be recorded when taking still pictures. Recording starts about0.5 seconds after the shutter is released and lasts about 4 seconds.When this function is enabled, sound is recorded automatically every timeyou take a picture.Top menu [MODE MENU] [CAMERA] [R] [ON]g“Using the menus” (P. 17)Note• Panorama mode is not available when there is no card in the camera.Panorama mode is only available with Olympus cards.• During panorama shooting, the flash, sequential shooting, and recording soundwith still pictures are not available.• The camera itself cannot connect panorama pictures. The OLYMPUS Mastersoftware is necessary to connect the pictures.Connects pictures fromleft to rightRecording sound with still pictures
