Olympus SP-310 Basic Manual

Also see for SP-310: Quick start guide Advanced manual Basic Manual Manual Avanzado Manuel Avancé

13En1 Press the # button repeatedly to set the flash mode.If not used for approximately 2 seconds, the camera applies the current settings, and thesetting screen disappears.2 Press the shutter button halfway.When the flash is set to fire, the # mark lights.3 Press the shutter button completely to take the picture.Flash working range:W (max.): Approx. 0.4 m to 3.8 m (1.3 ft. to 12.5 ft.)T (max.): Approx. 0.4 m to 2.2 m (1.3 ft. to 7.2 ft.)To save battery power, the camera automatically enters sleep mode and stopsoperating if not used for 3 minutes. Operate the shutter button or zoom lever toreactivate the camera.If the camera is not operated for 4 hours after the camera enters sleep mode, itautomatically retracts the lens and turns off. To resume operation, turn on thepower again.Icon Flash Mode Description(Noindication)Auto flash The flash fires automatically in low light or backlightconditions.!Red-eyereduction flashThe red-eye reduction flash mode significantly reduces thisphenomenon by emitting pre-flashes before firing theregular flash.# Fill-in flash The flash fires regardless of the available light.H Red-eye Fill-inflashThe flash always fires after pre-flashes for red-eyereduction are emitted.$ Flash off The flash does not fire even in low light conditions.Flash ModesPower Save Feature