42 ENMenu operationsYou can select the types of the sound and the picture displayed when the camera is turned on.• Select [2] and press 3 to set the still picture saved in the internal memory or card as the startupscreen.• The volume turns to the value set in [VOLUME].g “VOLUME Adjusting the volume during playback” (P.42)PW ON SETUP ........................................................ Setting the startup screen and soundSCREEN OFF (No picture is displayed.) / 1 / 2SOUND OFF (No sound) / 1 / 2BEEP ........................................ Adjusting the beep sound and volume when button is pressedOFF (No sound)1 LOW / HIGH2 LOW / HIGH8 ................................................................... Adjust the volume of camera warning soundOFF (No sound) / LOW / HIGHSHUTTER SOUND ............................. Selecting the sound and volume of the shutter buttonOFF (No sound)1 LOW / HIGH2 LOW / HIGHVOLUME ................................................................. Adjusting the volume during playbackOFF (No sound) / 1 / 2 / 3 / 4 / 5• Press 12 to adjust the volume.• You can select [OFF] or adjust in 5 steps from 1-5.REC VIEW ........................................................................... Viewing pictures immediatelyOFF The picture being recorded is not displayed. This is useful when youwant to prepare for your next shot while the previous picture is beingrecorded.ON The picture being recorded is displayed. This is useful when you wantto quickly review the last picture taken. You can resume shooting whilethe picture is still being displayed.istonOK21367SHUTTER SOUNDVOLUMEREC VIEWMENU DISPLAY45S E T U POKSETMENUBACK8