43ENSelecting a method for connectingSelecting a method for connectingthe camera to other devicesthe camera to other devices[USB Connection][USB Connection]r (Settings 1) X USB ConnectionSubmenu 2 ApplicationAutoWhen the camera is connected toanother device, the settings selectionscreen is displayed.Storage Select when connecting the camerato a computer via a storage device.MTPSelect when transferring imageswithout using the supplied [ib] (PCsoftware) on Windows Vista/Windows 7.Print Select when connecting to aPictBridge-compatible printer.System requirementsSystem requirementsWindows : Windows XP Home Edition/Professional (SP1 or later)/Vista/Windows 7Macintosh : Mac OS X v10.3 or laterWhen using another system other than Windows XP(SP2 or later)/Windows Vista/Windows 7, set to[Storage].Even if a computer has USB ports, proper operationis not guaranteed in the following cases:● Computers with USB ports installed using anexpansion card, etc.● Computers without a factory-installed OS andhome-built computersTurning on the camera with theTurning on the camera with the qqbutton [button [qq Power On]Power On]r (Settings 1) X q Power OnSubmenu 2 ApplicationNoThe camera is not turned on. To turnon the camera, press the nbutton.Yes Press and hold the q button to turnthe camera on in the playback mode.Saving the mode when the camera isSaving the mode when the camera isturned off [Keepturned off [KeepzzSettings]Settings]r (Settings 1) X KeepzSettingsSubmenu 2 ApplicationYesThe shooting mode is saved whenthe camera is turned off and isreactivated the next time the camerais turned on.No The shooting mode is set to P modewhen the camera is turned on.Choosing the opening screen displayChoosing the opening screen display[Pw On Setup][Pw On Setup]r (Settings 1) X Pw On SetupSubmenu 2 ApplicationOff No opening screen is displayed.On The opening screen is displayedwhen the camera is turned on.