Olympus SZ-14, SZ-12 Instruction Manual

Also see for SZ-12: Manual de instrucciones Manuel d'instructions Instruction manuals

Olympus SZ-14, SZ-12 Instruction Manual Manual pdf 58 page image

58 ENError messageWhen one of the messages below is displayed on themonitor, check the corrective action.Error message Corrective actionCard ErrorCard problemInsert a new card.Write ProtectCard problemThe card write-protect switch isset to the “LOCK” side. Releasethe switch.Memory FullInternal memory problem• Insert a card.• Erase unwanted images. *1Card FullCard problem• Replace the card.• Erase unwanted images. *1Card SetupOKSetFormatPower OffPower OffCard problemUse FG to select [Format], andpress the A button. Next, useFG to select [Yes], and press theA button.*2Memory SetupOKMemory FormatSetPower OffPower OffInternal memory problemUse FG to select [MemoryFormat], and press the A button.Next, use FG to select [Yes], andpress the A button.*2No PictureInternal memory/Card problemTake pictures before viewing them.Picture ErrorProblem with selected imageUse photo retouch software, etc.to view the image on a computer.If the image still cannot be viewed,the image file is corrupted.Error message Corrective actionThe Image CannotBe EditedProblem with selected imageUse photo retouch software, etc. toedit the image on a computer.Battery EmptyBattery problemCharge the battery.No ConnectionConnection problemConnect the camera and computeror printer correctly.No PaperPrinter problemLoad paper into the printer.No InkPrinter problemRefill the ink in the printer.JammedPrinter problemRemove the jammed paper.SettingsChanged*3Printer problemReturn to the status where theprinter can be used.Print ErrorPrinter problemTurn off the camera and printer,check the printer for any problems,and then turn the power on again.Cannot Print*4Problem with selected imageUse a computer to print.*1 Before erasing important images, download them to acomputer.*2 All data will be erased.*3 This is displayed, for instance, when the printer’s papertray has been removed. Do not operate the printer whilemaking the print settings on the camera.*4 This camera may be unable to print images taken byother cameras.