Olympus SZ-31MR Instruction Manual

Also see for SZ-31MR: Instruction manual Specifications

Olympus SZ-31MR Instruction Manual Manual pdf 51 page image

51ENFor information on using the menus, see “Setup menu” (p. 8).Adjusting the image processingAdjusting the image processingfunction [Pixel Mapping]function [Pixel Mapping]x (Settings Menu 2) X Pixel MappingThis function has already been adjusted at factoryshipping, and no adjustment is needed rightafter purchase. Approximately once a year isrecommended.For best results, wait at least one minute after takingor viewing pictures before performing pixel mapping.If the camera is turned off during pixel mapping, besure to perform it again.To adjust the image processing functionTo adjust the image processing functionPress the A button when [Start] (Submenu 2) isdisplayed.● The check and adjustment of the image processingfunction starts.Adjusting the brightness of the monitorAdjusting the brightness of the monitor[[ss]]x (Settings Menu 2) X sTo adjust the monitor brightnessTo adjust the monitor brightness1 Use FG to adjust the brightness while viewing thescreen, and then press the A button.MENUs BackPlaying back images on a TV [TV Out]Playing back images on a TV [TV Out]x (Settings Menu 2) X TV OutThe TV video signal system varies depending on the countries and regions. Before viewing camera images on yourTV, select the video output according to your TV’s video signal type.Submenu 2 Submenu 3 ApplicationNTSC/PAL NTSC Connecting the camera to a TV in North America, Taiwan, Korea, Japan,and so on.PAL Connecting the camera to a TV in European countries, China, and so on.HDMI Out 480p/576p, 720p,1080iSet the signal format to be given priority. If the TV setting does not match,it is changed automatically.HDMI Control Off Operate with the camera.On Operate with the TV remote control.The factory default settings differ according to the region where the camera is sold.