Olympus Stylus 400 Digital Reference Manual

Also see for Stylus 400 - Stylus 400 4MP Digital Camera: Operating instructions Software installation guide Manual de consulta Manuel de Référence Guide rapide de démarrage

Contents

Olympus Stylus 400 Digital Reference Manual Manual pdf 28 page image

27Power on/offGetting started1If the card is not recognized (card check)When the power is turned on, the camera checks the card automatically. Ifthere is no card in the camera or a card that is not supported by this camerais inserted, the following screen is displayed.• All data stored on the card is erased when the card is formatted.Monitor indication Corrective actionNO CARDThere is no card in the camera or the card is notinserted properly.Æ Insert a card. If a card is already inserted, removeit and insert it again correctly.The card cannot record, play back or erase pictures.Replace it with a new one or format the card.Æ Press to select POWER OFF, then press. Replace it with a new one.Æ Format the card.Press to select FORMAT, then pressto display the confirmation screen.Select YES and press .Formatting starts. If the card was successfullyformatted, the camera is ready to take pictures.NotePOWER%OFFFORMAtCARD%SEtUPSELECt GO