Olympus Stylus 7030 Instruction Manual

62 ENHandle the camera with care to avoid getting alow-temperature burn.When the camera contains metal parts,overheating can result in a low-temperatureburn. Pay attention to the following:When used for a long period, the camera willget hot. If you hold on to the camera in thisstate, a low-temperature burn may be caused.In places subject to extremely coldtemperatures, the temperature of the camera’sbody may be lower than the environmentaltemperature. If possible, wear gloves whenhandling the camera in cold temperatures.Be careful with the strap.Be careful with the strap when you carry thecamera. It could easily catch on stray objectsand cause serious damage.Battery Handling PrecautionsFollow these important guidelines to preventbatteries from leaking, overheating, burning,exploding, or causing electrical shocks orburns.DANGERThe camera uses a lithium ion battery specifiedby Olympus. Charge the battery with the specifiedAC adapter or charger. Do not use any other ACadapters or chargers.Never heat or incinerate batteries.Take precautions when carrying or storingbatteries to prevent them from coming into contactwith any metal objects such as jewelry, pins,fasteners, etc.Never store batteries where they will beexposed to direct sunlight, or subjected to hightemperatures in a hot vehicle, near a heat source,etc.To prevent causing battery leaks or damaging theirterminals, carefully follow all instructions regardingthe use of batteries. Never attempt to disassemblea battery or modify it in any way, solder, etc.If battery fl uid gets into your eyes, flush your eyesimmediately with clear, cold running water andseek medical attention immediately.Always store batteries out of the reach of smallchildren. If a child accidentally swallows a battery,seek medical attention immediately.WARNINGKeep batteries dry at all times.To prevent batteries from leaking, overheating,or causing a fi re or explosion, use only batteriesrecommended for use with this product.Insert the battery carefully as described in theoperating instructions.If rechargeable batteries have not been rechargedwithin the specifi ed time, stop charging them anddo not use them.•••••••••••••••••Do not use a battery if it is cracked or broken.If a battery leaks, becomes discolored ordeformed, or becomes abnormal in any other wayduring operation, stop using the camera.If a battery leaks fluid onto your clothing or skin,remove the clothing and fl ush the affected areawith clean, running cold water immediately. Ifthe fluid burns your skin, seek medical attentionimmediately.Never subject batteries to strong shocks orcontinuous vibration.CAUTIONBefore loading, always inspect the battery carefullyfor leaks, discoloration, warping, or any otherabnormality.The battery may become hot during prolongeduse. To avoid minor burns, do not remove itimmediately after using the camera.Always unload the battery from the camera beforestoring the camera for a long period.Caution for Usage EnvironmentTo protect the high-precision technology containedin this product, never leave the camera in theplaces listed below, no matter if in use or storage:Places where temperatures and/or humidityare high or go through extreme changes.Direct sunlight, beaches, locked cars, or nearother heat sources (stove, radiator, etc.) orhumidifiers.In sandy or dusty environments.Near flammable items or explosives.In wet places, such as bathrooms or in the rain.When using products with weatherproof designs,read their manuals as well.In places prone to strong vibrations.Never drop the camera or subject it to severeshocks or vibrations.When mounted on a tripod, adjust the position ofthe camera with the tripod head. Do not twist thecamera.Do not touch electric contacts on cameras.Do not leave the camera pointed directly at thesun. This may cause lens or shutter curtaindamage, color failure, ghosting on the CCD, ormay possibly cause fires.Do not push or pull severely on the lens.Before storing the camera for a long period,remove the batteries. Select a cool, dry locationfor storage to prevent condensation or mold fromforming inside the camera. After storage, test thecamera by turning it on and pressing the shutterbutton to make sure that it is operating normally.Always observe the operating environmentrestrictions described in the camera’s manual.••••••••••••••••••••