50 Connecting the camera to a computer41 Make sure the camera is turned off.• The monitor is off.• The lens cover is closed.2 Connect the multi-connector on thecamera to the USB port on the computerusing the provided USB cable.• Refer to your computer’s instruction manual tolocate the position of the USB port.• The camera turns on automatically.• The monitor turns on and the selection screen forthe USB connection is displayed.3 Select [PC], and press o.4 The camera is recognized by the computer.• WindowsWhen you connect the camera to your computer forthe first time, the computer attempts to recognizethe camera. Click “OK” to exit the message that isdisplayed. The camera is recognized as a “Removable Disk”.• MacintoshThe iPhoto program is the default application for managing digital images.When you connect your digital camera for the first time, the iPhotoapplication starts automatically, so close this application and startOLYMPUS Master.Note• The camera functions are disabled while the camera is connected to acomputer.• Connecting the camera to a computer via a USB hub may cause unstableoperation. In this case, do not use a hub, but connect the camera directly to thecomputer.Connecting the camera to a computerMonitorConnector coverMulti-connectorOKŜ Ŋ ŏ ŞSETU S BPCEASY PRINTCUSTOM PRINTEXIT
