67Getting to know your camera better5This card cannot beused in this camera. Or,the card is not formatted.Format the card or replace.• Select [POWER OFF] and press o.Insert a new card.• Select [FORMAT] [YES] and presso. All data on the card is erased.There is an error in theinternal memory.Select [MEMORYFORMAT] [YES] and press o. Alldata in the internal memory iserased.NO CONNECTIONThe camera is notconnected to the printercorrectly.Disconnect the camera and connectit again correctly.NO PAPERThere is no paper in theprinter.Load some paper in the printer.NO INKThe printer has run outof ink.Replace the ink cartridge in theprinter.JAMMEDThe paper is jammed. Remove the jammed paper.SETTINGSCHANGEDThe printer’s paper trayhas been removed orthe printer has beenoperated while changingsettings on the camera.Do not operate the printer whilechanging settings on the camera.PRINT ERRORThere is a problem withthe printer and/orcamera.Turn off the camera and printer.Check the printer and remedy anyproblems before turning the poweron again.rCANNOT PRINTPictures recorded onother cameras may notbe printed on thiscamera.Use a computer to print.Monitor indication Possible cause Corrective actionOKSETCARD SETUPPOWER OFFFORMAT[xD]OKSETMEMORY SETUPPOWER OFFMEMORY FORMAT[ I N ]
