34 ENMenu operationsOperating, shutting off and checking the alarm• Operating the alarm:Turn off the camera. The alarm only operates when the camera is off.• Shutting off the alarm:While the alarm is sounding, press any button to shut off the alarm and turn off the camera. Note thatpressing o will turn the camera on.When [SNOOZE] is set to [OFF], the alarm stops automatically and the camera turns off after 1minute of no operation.• Checking the alarm settings:While the camera is off, press to display the set alarm time and the current time for 3seconds.The factory default settings differ according to the region where the camera is sold.To play back camera images on a TV, set the video output according to your TV’s video signal type.• TV video signal types by country/region Check the video signal type before connecting the camera tothe TV.NTSC: North America, Taiwan, Korea, JapanPAL: European countries, ChinaPlaying back pictures on a TVTurn off the camera and the TV before connecting.When no operation has been performed for approximately 10 seconds while in shooting mode, themonitor automatically shuts off. Pressing the zoom button or other buttons restores the camerafrom power save mode.VIDEO OUT ................................................................................. Playing back pictures on a TVNTSC / PALPOWER SAVE ............................................................Setting the camera to power save modeOFF / ONConnect to the TV’s videoinput (yellow) and audioinput (white) terminals.AV cable (provided)Multi-connector Connector coverSettings on the cameraPress o in playback mode to turn thecamera on.• The last picture taken is displayed on the TV.Use the arrow pad to select the picture youwant to display.Settings on the TVTurn the TV on, and set it to video inputmode.• For details of switching to video input, refer toyour TV’s instruction manual.