39Menu operations2The factory default settings differ according to the region where the camerais sold.To play back camera images on a TV, set the video output according to your TV’svideo signal type.• TV video signal types by country/region Check the video signal type beforeconnecting the camera to the TV.NTSC: North America, Taiwan, Korea, JapanPAL: European countries, ChinaPlaying back pictures on a TVTurn off the camera and the TV before connecting.Set the display or nondisplay of the histogram when O button is pressed inshooting mode.Set the display or nondisplay and the type of frame assist to be displayed whenO button is pressed in shooting mode.VIDEO OUT ........................................................... Playing back pictures on a TVNTSC / PALu ..........................................................................................Display the histogramOFF / ONFRAME ASSIST .................................Display the frame assist/Decide the typeOFF / w /xConnect to the TV’s videoinput (yellow) and audioinput (white) terminals.AV cable (provided)Multi-connector Connector coverSettings on the cameraSet the mode dial to q, and pressthe o button to turn the cameraon.• The last picture taken is displayedon the TV. Use the arrow pad(1243) to select the picture youwant to display.Settings on the TVTurn the TV on, and set it to videoinput mode.• For details of switching to videoinput, refer to your TV’s instructionmanual.
