Olympus Stylus M 760 Instruction Manual

Also see for 225905 - Stylus 760 Digital Camera: Manual Avanzado Manual

EN 57Getting to know your camera betterWhen you get an error message on the camera...Monitor indication Possible cause Corrective actionqCARD ERRORThere is a problem with thecard.This card cannot be used. Insert a new card.qWRITE-PROTECTWriting to the card isprohibited.The recorded image has been protected(read-only) on a computer. Download theimage to a computer and cancel the read-only setting.>MEMORY FULLThe internal memory has noavailable memory andcannot store any new data.Insert a card or erase unwanted data.Before erasing, back up the data ofimportant pictures using the card, ordownload such pictures to a computer.qCARD FULLThe card has no availablememory and cannot storeany new data.Replace the card or erase unwanted data.Before erasing, download importantpictures to a computer.LNO PICTUREThere are no pictures in theinternal memory or on thecard.The internal memory or the card contains nopictures.Record pictures.rPICTURE ERRORThere is a problem with theselected picture and it cannotbe played back on thiscamera.Use image processing software to view thepicture on a computer. If that cannot bedone, the image file is damaged.rTHE IMAGECANNOT BEEDITEDPictures taken by othercameras, taken in [16:9], orpreviously edited orcorrected pictures cannot beedited or fixed.Use image processing software to edit thepictures.CARD-COVEROPENThe battery/cardcompartment cover is open.Close the battery/card compartment cover.gBATTERY EMPTYThe battery is empty. Charge the battery.This card cannot be used inthis camera. Or, the card isnot formatted.Format the card or replace.• Select [POWER OFF] and press o.Insert a new card.• Select [FORMAT] [YES] and press o.All data on the card is erased.There is an error in theinternal memory.Select [MEMORY FORMAT] [YES] andpress o. All data in the internal memory iserased.NO CONNECTIONThe camera is not connectedto the computer or printercorrectly.Disconnect the camera and connect it againcorrectly.NO PAPERThere is no paper in theprinter.Load some paper in the printer.OKSETCARD SETUPPOWER OFFFORMATOKSETMEMORY SETUPPOWER OFFMEMORY FORMAT[ I N ]