14 15Mode display Exposure mode FunctionFLASH PHOTOGRAPHYNight Scene FlashFLASH PHOTOGRAPHYRed-Eye Reduction Night Scene FlashUse this mode to clearly shoot a subject in the foregroundand a night scene in the background.Closing the lens barrier restores the Auto Flash mode. Since a slow shutter speed (as low as 4 seconds) is selected in theNight Scene Flash mode, use a tripod to prevent camera shake. This mode cannot be combined with the Spot Metering mode.Closing the lens barrier restores the Auto Flash mode. Since a slow shutter speed (as low as 4 seconds) is selected in theRed-Eye Reduction Night Scene Flash mode, use a tripod to preventcamera shake. This mode cannot be combined with the Spot Metering mode.Use this mode to take pictures of people with a night scenebackground while reducing “red-eye.” Except for the pre-flashes, this mode is the same as the Night Scene Flash mode.EXPOSURE MODESSetting the Exposure ModePress the shutter release buttonhalfway; the green lamp lights and thefocus and exposure are locked on thatarea. Reframe your subject and pressthe shutter release button all the way.This camera has three exposure modes. Choose the modethat best suits the conditions and your requirements.How to select the modePress the exposure mode button( / ). The mode switches in theorder shown below. The selectedmode is displayed on the LCD panel.Use this mode in ordinary situations.To precisely set the focus andexposure for each subject.To shoot scenery through a window.AutoExposureSpotMeteringInfinityNodisplaySpot MeteringPosition the spot marks on the area where you want tomeasure the light.InfinityThe camera automatically sets the working distance at infinity.Closing the lens barrier restores the Auto Exposure mode.Spot marksThe flash does not fire except in theFill-In Flash mode.Closing the lens barrier restores the Auto Exposure mode.2754 Q05N_EN 02.11.18, 8:22 PM14-15