Olympus TG-1 Instruction Manual

Also see for TG-1: Specifications

Olympus TG-1 Instruction Manual Manual pdf 44 page image

44 ENErasing images [Erase]Erasing images [Erase]q (Playback Menu)  EraseSubmenu 2 ApplicationAll Erase All images in the internal memory orcard will be erased.Sel. Image Images are individually selected and erased.Erase Deletes the image displayed.When erasing pictures in the internal memory, do notinsert the card into the camera.Protected images cannot be erased.To individually select and erase imagesTo individually select and erase images[Sel. Image][Sel. Image]1 Use FG to select [Sel. Image], and press theA button.2 Use HI to select the image to be erased, and pressthe A button to add a R mark to the image.OKMENUErase/CancelSel. Image (1)4/304/30Rmark3 Repeat Step 2 to select the images to be erased,and then press the  button to erase the selectedimages.4 Use FG to select [Yes], and press the A button.● The images with a R mark are erased.To erase all images [All Erase]To erase all images [All Erase]1 Use FG to select [All Erase], and press theA button.2 Use FG to select [Yes], and press the A button.Saving print settings to the image dataSaving print settings to the image data[Print Order][Print Order]q (Playback Menu)  Print Order“Print reservations (DPOF)” (p. 57)Print reservation can be set only for still images thatare recorded to the card.Protecting images [Protecting images [RR]]q (Playback Menu)  RProtected images cannot be erased by [Erase] (p. 22,44), [Sel. Image] (p. 44), or [All Erase] (p. 44), but allimages are erased by [Memory Format]/[Format](p. 45).1 Use HI to select an image.2 Press the A button.● Press the A button again to cancel the settings.3 If necessary, repeat Steps 1 and 2 to protect otherimages, and press the  button.Select images for upload to the InternetSelect images for upload to the Internetusing the supplied OLYMPUS Viewer 2using the supplied OLYMPUS Viewer 2software [Upload Order]software [Upload Order]q (Playback Menu)  Edit  Upload Order1 Use HI to select an image.2 Press the A button.● Press the A button again to cancel the settings.3 Repeat Steps 1 and 2 as required.4 Press the  button.Only JPEG fi les can be selected for upload.See on-line help for upload instructions.GPS data recorded with images can not be deleted.Select [Off] for [GPS Settings] if you do not wish toreveal the locations where photographs were taken.