45ENMenus for Other Camera SettingsMenus for Other Camera SettingsThe default settings of the function are highlighted in .Using an Eye-Fi card [Eye-Fi]Using an Eye-Fi card [Eye-Fi]d (Settings Menu 1) Eye-FiSubmenu 2 ApplicationAll Transfers all images.Sel. Image Transfers only selected image.Off Disable Eye-Fi communication.When using an Eye-Fi card, read the Eye-Fi cardinstruction manual carefully, and comply with theinstructions.Use the Eye-Fi card in compliance with the laws andregulations of the country where the camera is used.In locations such as on an airplane, where the Eye-Ficommunication is prohibited, remove the Eye-Fi cardfrom the camera, or set [Eye-Fi] to [Off].This camera does not support the Eye-Fi card’sEndless mode.Erasing data completelyErasing data completely[Memory Format]/[Format][Memory Format]/[Format]d (Settings Menu 1) Memory Format/FormatBefore formatting, check that no important data is leftin the internal memory or card.Cards must be formatted with this camera beforefi rst use or after being used with other cameras orcomputers.Be sure to remove the card before formatting theinternal memory.Submenu 2 ApplicationYesCompletely erases the image datain the internal memory or card(including protected images).No Cancels formatting.Copying images in the internal memoryCopying images in the internal memoryto the card [Backup]to the card [Backup]d (Settings Menu 1) BackupSubmenu 2 ApplicationYes Backs up image data in the internalmemory to the card.No Cancels the backup.