Olympus VG-110/D-700 Instruction Manual

Also see for D-700: Manual de instrucciones Manuel d'instructions Manual de instruções

Olympus VG-110/D-700 Instruction Manual Manual pdf 40 page image

40 ENFor information on using the menus, see “Using the Menu” (p. 4).To erase all images [All Erase]To erase all images [All Erase]1 Use FG to select [All Erase], and press theQ button.2 Use FG to select [Yes], and press the Q button.To individually select and erase imagesTo individually select and erase images[Sel. Image][Sel. Image]1 Use FG to select [Sel. Image], and press theQ button.2 Use HI to select the image to be erased, and pressthe Q button to add a R mark to the image.Press the W zoom button to display an index view.Images can be quickly selected using FGHI.Press the T button to return to the single framedisplay.MENUOKSel. ImageErase/CancelR mark3 Repeat Step 2 to select the images to be erased,and then press the m button to erase the selectedimages.4 Use FG to select [Yes], and press the Q button.The images with a R mark are erased.●●Saving print settings to the image dataSaving print settings to the image data[Print Order][Print Order]q (Playback menu) X Print Order“Print Reservations (DPOF)” (p. 49)Print reservation can be set only for still images thatare recorded to the card.Protecting images [Protecting images [??]]q (Playback menu) X ?Protected images cannot be erased by [Erase] (p. 25,39), [Sel. Image], or [All Erase] (p. 39), but all imagesare erased by [Memory Format]/[Format] (p. 41).1 Use HI to select an image.2 Press the Q button.Press the Q button again to cancel the settings.3 If necessary, repeat Steps 1 and 2 to protect otherimages, and press the m button.Rotating images [Rotating images [yy]]q (Playback menu) X y1 Use HI to select an image.2 Press the Q button to rotate the image.3 If necessary, repeat Steps 1 and 2 to make settingsfor other images, and press the m button.The new picture orientations will be saved even afterthe power is turned off.●