6 Troubleshooting65ENProblem Possible cause SolutionThe display is blank.The battery is not insertedproperly.Check that the positive and negativeterminals of the battery are placedcorrectly (☞ P.8).The remaining battery poweris low.Replace or charge the battery(☞ P.8, P.11).The power is OFF. Turn the power ON (☞ P.9).Unable to operate thevoice recorder.The remaining battery poweris low.Replace or charge the battery(☞ P.8, P.11).The power is OFF. Turn the power ON (☞ P.9).The voice recorder is in HOLDmode. Release HOLD mode (☞ P.17).Unable to record.There is no remaining memory. Erase unneeded files (☞ P.38).The maximum number ofrecordable files has been reached. Select another folder (☞ P.19).Playback is inaudible.The earphones are connected tothe earphone jack.To output the playback through the built-in speaker, disconnect the earphones.The volume is set to [00]. Adjust the volume (☞ P.30).The recording is tooquiet.A low recording level has beenset.Redo recording after setting the recordinglevel to [High] (☞ P.44).The output level of the connectedexternal device may be too low.Adjust the output level of the externaldevice.Troubleshooting
