Olympus XZ-1 Instruction Manual

Olympus XZ-1 Instruction Manual Manual pdf 59 page image

59ENFor information on using the menus, see “Using the Menus” (p. 6).Resetting file numbering [File Name]Resetting fi le numbering [File Name]x (Setup menu) X File NameMonth: 1 to C(A=October,B=November,C=December)Day: 01 to 31P m ddFolder name Folder name File nameDCIM 100OLYMP999OLYMPPmdd0001.jpgPmdd9999.jpgAutomaticnumberingAutomaticnumberingSubmenu 2 ApplicationResetFile numbering is reset when a newcard is inserted *1 (choose whenorganizing images by card).AutoWhen a new card is inserted, fileand folder numbering continue fromthe previous card (choose whenorganizing images by fi le and foldernumber).*1 Folder numbering is reset to 100, fi le numbering to0001.Adjusting the CCD and the imageAdjusting the CCD and the imageprocessing function [Pixel Mapping]processing function [Pixel Mapping]x (Setup menu) X Pixel MappingThis function has already been adjusted at factoryshipping, and no adjustment is needed rightafter purchase. Approximately once a year isrecommended.For best results, wait at least one minute after takingor viewing pictures before performing pixel mapping.If the camera is turned off during pixel mapping, besure to perform it again.To adjust the CCD and the imageTo adjust the CCD and the imageprocessing functionprocessing functionPress A when [Start] (Submenu 2) is displayed.The camera checks and adjusts the CCD and theimage processing function at the same time.Adjusting the brightness of the monitorAdjusting the brightness of the monitor[[ss]]x (Setup menu) X sAdjusting monitor brightnessAdjusting monitor brightness1 Use FG to adjust (the effect can be viewed in themonitor), and then press A.sBack Set●