Omcan 28 Instruction Manual

Also see for 28: Instruction manual

Omcan 28 Instruction Manual Manual pdf 8 page image

8MaintenanceCLEANING• Handle the basket assembly (5) carefully so as not to move it out of position, causing the machine fromworking properly.• To clean the basket assembly (5), it is recommended to use the brush (25) supplied with the machine, forproper cleaning of filter sieve holes and the grater teeth (Fig. 15). Do not use abrasive sponge for cleaningthe basket.• Cleaning will be easier if you do not wait for the food remains to dry in the bowl, basket and cover.WARNINGDuring preparation, the level in the pulp container (6) should be monitored to prevent the cover pulp outlet(2) from clogging. Such clogging could result in an imbalance in the basket assembly (5) and cause a risk ofdamaging the machine. The quantity of products to be processed before reaching the maximum filling levelin the container (6) varies according to the products being processed. If during preparation an imbalanceshould occur well before the pulp container is full, it is sometimes appropriate to continue adding food forthe imbalance to be cleared. But if the imbalance continues, the machine must be stopped and the basketassembly (5) cleaned. Certain products are liable to clog or block the sieve holes, in which case the basketassembly (5) should be cleaned more frequently.Before carrying out any work on the juice extractor, the machine must be unplugged from the mains powersupply and the motor start capacitor discharged:Discharging the capacitor: Use a screwdriver with insulated handle to touch the 2 connectors on the capacitor(13). The appearance of an electric arc shows that the capacitor has discharged (Fig. 14).SPARE PARTSIMPORTANT: Use of spare parts other than certified original parts is prohibited. This machine requires noparticular maintenance because the bearings are lubricated for life. If any maintenance is necessary to replaceparts subject to wear, such as the grater, the basket, electrical or other components, please refer to the partslist.For the machine to operate properly, it is recommended that a check is also made that the locking membrane(21) is in good condition, in particular the absence of any signs of tearing. Also check that the elastomer drivesprockets (22) are in good condition, in particular the absence of any signs of wrenching. For all spare partorders (see the Parts Breakdown section of the manual), state the type, the appliance serial number and theelectrical specifications recorded under the appliance.SERVICINGDo not use a hose or a pressurize water jet for cleaning.• After use, clean the basket assembly, bowl, cover, pulp container, plunger in clean water or with a dishwashing detergent product designed for this purpose. Then rinse and dry. Do not use abrasive products orpads to clean the basket assembly.