6OperationCONTROLSThe controls and pilot light are on the right side of the base when the machine is located in front of theoperator.1. Green button for starting the machine.2. Red button for stopping the machine.SETTING THE DISCS ON THE MACHINERotate the knob as shown (Pic. 4 on page 14) and open the cover. First set the plastic ejecting disc (Pic. 5 onpage 14), then the disc selected for the cutting. Close the cover and reverse the rotation of the handle. Use thestart button to automatically hook the discs in the correct position.SETTING AND CUTTING THE FOODLift the handle and set the food inside the product opening, then close the handle. Press the green start buttonwith your right hand and with your left hand, lightly push the handle downwards until food is fully used. Liftthe handle to put in more food. The machine starts automatically when the handle is closed. Repeat theseoperations until all food is used. It is possible to use the two openings with a single disc. When two discs areTechnical SpecificationsSafety and WarrantyModel FP-CN-0185Horse Power 0.75Disc Speed 270 RPMMouth Opening 130 x 55mm / 5.1” x 2.2”Electrical 110V / 60Hz / 1 PHWeight 23 kg. / 50.6 lbs.Dimensions (DWH) 483 x 229 x 500mm / 19” x 9” x 19.7”Item Number 19476 24202In any case, for suitable recycling, we suggest disposing of the products separately (differentiatedwaste)according to the current norms.DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!